Trigger - National Instruments PXI-8101 User Manual

Chapter 3 I/O Information

Trigger

NI PXI-8101/8102 User Manual
Figure 3-7. Installing a Ferrite on a Single USB Cable
The TRIG connector is the software-controlled trigger connection for
routing PXI triggers to or from the backplane trigger bus.
Figure 3-8 shows the TRIG connector location on the NI PXI-8101/8102.
Table 3-8 lists and describes the trigger connector signals.
Embedded Controller
Figure 3-8. TRIG Connector Location and Pinout
1
NI PXI-8101
3-10
2
ni.com