Hard Drive Recovery; Installing An Os; Installing From A Usb Cd/Dvd-Rom - National Instruments PXI-8101 User Manual

Chapter 2 Installation and Configuration

Hard Drive Recovery

Note Your system hot key is <F4>. To access the hard drive-based recovery tool, press and
hold <F4> when video first appears during the boot process.
Recovering the OS erases the contents of your hard disk. Back up any files you want
Note
to keep prior to the recovery.

Installing an OS

Installing from a USB CD/DVD-ROM

Note For additional assistance with installing or changing an operating system, refer to
KnowledgeBase 2ZKC02OK, Hard Drive Recovery and OS Installation for PXI and VXI
Controllers, at
NI PXI-8101/8102 User Manual
NI PXI-8101/8102 controllers include two methods of restoring
the original factory condition of your hard drive. Hard drive-based
recovery stores a factory backup on a separate portion of your hard drive
allowing you to restore your controller without additional media. The
NI PXI-8101/8102 controller also ships with an OS Recovery DVD that
allows you to reinstall your operating system onto your hard drive through
an external USB DVD-ROM. For more information on these tools, refer to
KnowledgeBase 2ZKC02OK, Hard Drive Recovery and OS Installation
for PXI and VXI Controllers, at
If you need to recover your factory-installed operating system from
a DVD, you can use the included OS re-installation DVD with an
external USB DVD-ROM drive. Boot the PXI controller using the
OS re-installation DVD to recover the OS. After using the DVD to recover
the OS you also may need to reinstall other software.
NI PXI-8101/8102 controllers include a pre-installed OS. In some cases,
you may want to install a different OS. When doing so, consider the
following guidelines.
The NI PXI-8101/8102 supports the installation of Windows 7, XP, and
Vista from a USB CD-ROM.
As an alternative to a USB CD-ROM drive, you can use an external SCSI
CD-ROM with a PXI-SCSI adapter.
.
ni.com/support
ni.com/support
2-24
.
ni.com