Upgrading RAM
National Instruments has tested and verified that the DDR2 SO-DIMMs we sell
Note
work with the NI PXI-8101/8102. We recommend you purchase your DDR2 SO-DIMM
modules from National Instruments. Other off-the-shelf DDR2 SO-DIMM modules
are not guaranteed to work properly.
1 DDR2 SO-DIMM Module
© National Instruments Corporation
Device drivers and other utility software read the
obtain system information. For detailed information about initialization
files, refer to the PXI specification at
You can change the amount of installed RAM on the NI PXI-8101/8102 by
upgrading the SO-DIMM.
National Instruments offers the following types of SO-DIMMs for use with
the NI PXI-8101/8102 controller.
PC2-6400 1 GB, 128 MB × 64, 1.18 in. max
•
PC2-6400 2 GB, 256 MB × 64, 1.18 in. max
•
PC2-6400 4 GB, 512 MB × 64, 1.18 in. max
•
Figure 2-7. Installing a DDR2 SO-DIMM in an NI PXI-8101/8102 Controller
Chapter 2
www.pxisa.org
2 DDR2 SO-DIMM Socket
2-23
Installation and Configuration
file to
pxisys.ini
.
1
2
NI PXI-8101/8102 User Manual