Table of Contents
Advertisement
Chapter 2
Installation and Configuration
Basic PXI System Configuration
NI PXI-8101/8102 User Manual
The configuration steps for single or multiple-chassis systems are the same.
An example of a multichassis configuration is shown in Figure 2-6.
Figure 2-6. Multichassis Configuration in MAX
1.
Launch MAX.
2.
In the Configuration tree, click the Devices and Interfaces branch to
expand it.
3.
If the PXI system controller has not yet been configured, it is labeled
PXI System (Unidentified). Right-click this entry to display the
pop-up menu, then select the appropriate controller model from the
Identify As submenu.
4.
Click the PXI System controller. The chassis (or multiple chassis, in a
multichassis configuration) is listed below it. Identify each chassis by
right-clicking its entry, then selecting the appropriate chassis model
through the Identify As submenu. Further expanding the PXI System
branch shows all devices in the system that can be recognized by
NI-VISA. When your controller and all your chassis are identified,
a
file is generated.
pxisys.ini
2-22
ni.com
Advertisement
Table of Contents
