Table of Contents
Advertisement
Chapter 1
Introduction
National Instruments Software
NI PXI-8101/8102 User Manual
•
The Mobile Intel GM45 Express Chipset (Graphics and Memory
Controller Hub) connects to the CPU, DDR2 SDRAM, and
DVI-I video.
•
The SMB to PXI Trigger provides a routable connection of the
PXI triggers to/from the SMB on the front panel.
•
The Watchdog Timer block consists of a watchdog timer that can reset
the controller or generate a trigger.
•
The Chipset ICH9M (I/O Controller Hub) connects to the PCI, USB,
SATA, LPC buses, and Ethernet.
•
The USB Connectors are connected to the ICH9M chipset.
•
The PXI Connector connects the NI PXI-8101/8102 to the
PXI/CompactPCI backplane.
•
The Super I/O block represents the other peripherals supplied by the
NI PXI-8101/8102. The NI PXI-8101/8102 has one serial port, and an
ECP/EPP parallel port.
•
The Gigabit Ethernet connects to either 10 Mbit, 100 Mbit, or
1,000 Mbit Ethernet interfaces.
•
The SATA block connects a Serial ATA hard drive to the ICH9M.
National Instruments has developed several software tools you can use with
the NI PXI-8101/8102.
National Instruments' hardware and software work together to help you
make the most of your PXI system. The LabVIEW, Measurement Studio,
™
and LabWindows
/CVI
with leading hardware drivers such as NI-DAQmx to provide exceptional
control of NI hardware. Instrument drivers are available at
to simplify communication with instruments over a variety of busses.
LabVIEW is a powerful and easy-to-use graphical programming
environment you can use to acquire data from thousands of different
instruments including USB, IEEE 488.2, VXI, serial, PLCs, and plug-in
boards. LabVIEW helps you convert acquired data into meaningful results
using powerful data analysis routines. Add-on tools provide additional
specialized functionality. For more information visit
and
ni.com/toolkits
™
application development environments combine
.
1-4
ni.com/idnet
ni.com/labview
ni.com
Advertisement
Table of Contents
