Conversation With Three Participants - Gigaset N610 IP PRO Instruction Manual

Using a handset connected to an N610 IP PRO base
Group pickup
You can also accept incoming calls for the group.
Group pickup must be activated and the call number or SIP URI of the group must be entered.
This has to be configured for the handset via web configurator in the Group pick-up section
( p. 41).
Accepting/rejecting call waiting
A call waiting tone indicates a call during an external call. The number or the name of the caller
is displayed if the phone number is transferred.
•
Reject a call: Options
•
Accept a call: Accept
•
End the call, resume the on-hold call:

Conversation with three participants

Consultation calls
Make another external call during an external call. The first call is placed on hold.
Ext. Call use
on hold and the second participant is called
If the second participant does not answer:
Ending a consultation call
Options End Active Call
or
Press the End call key
Call swapping
Switching between two calls. The other call is placed on hold.
During an external call, dial the number of a second participant (consultation call) or accept
a waiting caller . . . the display shows the numbers and/or names of both call participants
Use the control key
Ending a currently active call
Options End Active Call
or
Press the End call key
80
Reject
speak to the new caller. The previous call is placed on hold.
Press the End call key
to enter the number of the second participant . . . the active call is placed
OK . . . the connection to the first caller is reactivated
. . . a recall to the first participant is initiated
to switch back and forth between participants
OK
. . .
. . . a recall to the first participant is initiated
OK
End
the connection to the other caller is reactivated
.