System settings
Restoring configuration data
Click on Browse...
your computer.
The secured configuration file can also be loaded onto a new device.
Prerequisites:
•
The old device must no longer be in operation.
•
The firmware version of the new device must correspond, at least, with the version
of the device from which the data is saved, including the set patches.
Automatic backup
You can automatically back up your configuration to an SFTP server at regular intervals (SFTP =
Secure File Transfer Protocol).
Enable automatic backup
Select the check box next to Enabled . . . the automatic backup of your configuration is acti-
vated according to the following settings when you click on the Set button.
Server
Enter the address of the server to which the backup should be sent.
The URL must end with a slash (/), otherwise the SFTP upload will not start.
Example: sftp://192.168.178.200/
The system creates a backup file with the following name:
<MAC address>_<software version>_YYYY_MM_DD_device-settings
You can also enter the name of the file directly:
Example: sftp://192.168.178.200/system_backup.cfg
Server port
Enter the port number, where the SFTP server expects to receive requests (default: 22).
Authentication name
Specify the authentication name for the access to the SFTP server.
Authentication password
Enter the password for the access to the SFTP server.
66
Select the previously saved configuration file from the file system of
Click on Upload . . . the selected configuration file is loaded.