Reboot And Reset - Gigaset N610 IP PRO Instruction Manual

Planned schedule
At a specific date:
Immediately:
Confirmed schedule
Shows Immediately or the date for the next planned backup.

Reboot and reset

This page allows you to reboot the device and to reset the system to factory settings.
It is available for both the user role admin and user.
Settings System
Manual reboot
Click on Reboot now
Reset to factory settings
All configuration settings can be reset to the factory default. This will delete all settings, discon-
nect all connections, and terminate all calls!
When resetting to factory defaults all settings are lost. You can save your current
configuration previously (
Factory reset can also be performed by using the device key.
Defining the role
From the Reset to device option menu, select the role the device should have after the reset.
All in one - dynamic IP
The network configuration is set to dynamic IP.
All in one - static IP
The network configuration is set to the following static IP settings:
IP address:
Subnet mask:
Gateway:
All in one + internal telephony - dynamic IP
Multiple lines (SIP accounts) can be assigned to the handsets. Internal calls between
handsets registered to the base are possible. The network configuration is set to
dynamic IP.
All in one is the default setting for a Gigaset N610 IP PRO. All three components are
active in one device (Integrator + DECT manager + base station).
Deselect the check box Immediately
week on which a backup should be executed
the format: HH:MM
Select the check box next to Immediately . . . the backup is started when
you click on the Set button.
Reboot and reset
Confirm with Yes . . . the reboot starts immediately.
p. 65).
192.168.143.1
255.255.0.0
192.168.1.1
System settings
Select one or more days of the
Enter the start time in
67