Gigaset N610 IP PRO Instruction Manual page 37

On the handset
Start the registration procedure as described in the appropriate documentation.
prompted, enter the PIN that has been entered or generated.
Registering a set of handsets
You can register a set of handsets without restarting the registration mode. Prepare registration
for new mobile devices as follows:
Enter the actual IPUI and maybe an individual PIN
or
Use wildcards as IPUI (0_1, 0_2, 0_3 ... ) and preferably the same PIN for all handsets.
Set the RegStatus of the handsets to To register
Open the registration window for a desired time and register all handsets without further
Web UI interaction via the Registration Centre (
Parameters
IPUI
(International Portable User Identity) Unique identifier of a handset within the DECT network. If
you edit an existing handset registration entry, the IPUI is shown and cannot be changed.
For a new entry:
Enter the IPUI of the handset that should be allowed to register with the DECT network in the
text field.
If the field is empty, any handset will be allowed to register.
RegStatus
DECT registration status of the handset entry. The option menu allows you to change the status.
Status Meaning / possible action to change the status
To register The system is ready to register a handset using these settings.
Not registered No registration possible.
In registration Registration in progress.
Registered The handset is registered.
Authentication Code (PIN)
This PIN must be used on the handset to register with the DECT network.
Enter a PIN in the text field. Value: 4 digits
or
Click on Generate random PIN . . . a four-digit PIN is generated and shown in the text field.
Select Not registered to disable registration.
Select To register to allow a handset to register using these settings.
Select Not registered to cancel the running registration process.
Select To deregister to de-register the handset.
p. 43).
Mobile devices
When
37