Internal Calls - Gigaset N610 IP PRO Instruction Manual

Conference
Speaking to both participants at the same time.
During an external call, dial the number of a second participant (consultation call) or accept
a waiting caller . . . then
Initiate conference call:
Confer. all callers can hear one another and hold a conversation with one another
. . .
Return to call swapping:
End Conf. You will be reconnected to the participant with whom the conference call was
. . .
initiated
End call with both participants:
Press the End call key
Each of the participants can end their participation in the conference call by pressing the End
call key or hanging up.
Call transfer
Connecting an external call with a second external participant.
Use the display key Ext. Call to establish an external consultation call
number of the second participant . . . the active call is placed on hold . . . the second
participant is called
second participant has answered) . . . the call is transferred
Call transfer options must be set correctly for the PBX/provider (

Internal calls

Internal calls are only possible, if the device is in All in one + internal telephony - dynamic IP
mode ( p. 7) and at least two handsets are registered to the base station.
Calling
Press INT key briefly . . . the handset list is opened, the own handset is marked with <
select a handset
or
enter the internal number of the handset . . . the call is initiated automatically
Using a handset connected to an N610 IP PRO base
press the End call key
press the Talk key
(during a conversation or before the
use to enter the
p. 46).
81