Dect Settings - Gigaset N610 IP PRO Instruction Manual

System settings
Resetting the device
Click on the Reset to button to reset the device to factory condition according to the selec-
tion made in Reset to device . . . a confirmation dialogue is opened
Yes The Save and restore page is opened allowing you to save the current configura-
tion on your computer (
No The reset procedure starts at once. The current configuration will be lost.
Cancel The reset procedure is interrupted.

DECT settings

This page allows you to make settings for the DECT radio network.
It is only available for the user role admin.
Settings System
Changing one of these settings requires a restart of the system. Ongoing calls will be
cancelled.
ECO DECT
ECO DECT is an environment-friendly technology which reduces the power consumption and
enables a variable reduction of transmission power.
DECT Radiation power
Set the DECT radiation power to your needs:
Maximum The device range is set to maximum (default). This guarantees the best
range: connection between the handset and the base stations. In idle status, the
handset will not send radio signals. Only the base station will maintain
contact with the handset via a low wireless signal. During a call, the trans-
mission power automatically adapts to the distance between the base
station and handset. The smaller the distance to the base, the lower the
radiation.
Limited range: The radiation is reduced by up to 80 %. This will also reduce the range.
DECT security settings
DECT radio traffic between base stations and handsets is encrypted by default. The following
options allow you to define the security settings in more detail.
DECT Encryption
Activate/deactivate the option.
Activated: All calls are encrypted.
Deactivated: No calls are encrypted.
68
p. 65).
DECT settings
confirm with