Save And Restore - Gigaset N610 IP PRO Instruction Manual

Selecting the firmware update file
In the URL to firmware file text field specify the URL of the configuration server where the
firmware is located
or
Click Browse... and select the firmware file from your computer's file system.
Starting the firmware update
At a specific date:
Immediately:
Confirmed schedule
Shows Immediately or the date for the next planned firmware update.
Click on Set to save the settings and to start the firmware update.
Once the update process starts, the handsets lose their connection to the base. You can tell that
the update has been successful when the handsets re-establish the connection to the base.
The firmware update may take up a longer period. Do not disconnect the device
from the local network during this time.

Save and restore

This page allows you to save and restore the system configuration.
It is available for both the user role admin and user. The user is only allowed to save the settings
but not to restore them.
Settings System
Once you have configured the phone system and after making any changes to the configura-
tion, particularly registering or de-registering handsets, you should save the latest settings in a
file on the computer so that the current system can be restored quickly if problems occur.
If you change the settings accidentally or you need to reset the device due to a fault, you can
reload the saved settings from the file on your computer to your telephone system.
The configuration file contains all system data including the DECT registration data of the hand-
sets, but not the calls list on the handsets.
Saving configuration data
Click on Save settings
using the system file selection dialogue. Enter a name for the configuration file.
The default file name is
<MAC address of integrator><firmware version><date of export>_device-settings
Deselect the check box Immediately
format: YYYY-MM-DD HH:mm
Select the check box next to Immediately (default) . . . the firmware
update is started when you click on the Set button.
Save and restore
Select the location where the configuration file should be stored
System settings
Enter the exact start time in the
65