Resetting the base station
You use the device button on the front side to reset the base station.
Press the device button for at least 10 seconds until all LEDs switch off.
. . . the device is now in programming mode.
Short press the device button until both LED lights blue.
Press the device button at least three seconds but less than
10 seconds . . . the device is reset and rebooted.
The system is reset to factory setting. This means, that existing configuration and
user data will be lost.
Emergency reset to factory settings
When the device is booting
Press the device button for at least 10 seconds until all LED switch off
. . . the device is now in programming mode.
Press the device button until both LED lights blue
Press the device button for at least four seconds . . . the device is reset and rebooted.
Operation hints
Release the button
release the button
13