To Supply Power Source - Technics SL-DV250 Service Manual

1. After adjustment, remove top cover, tray, clamper base and
traverse unit in this sequence.
2. Lay the traverse unit upside down, and fix adjustment screw with
screw lock.
3. After fixing, reassemble traverse unit, clamper base, tray and top
cover.

9. To Supply Power Source

Cautions:
- It is very dangerous to look at or touch the laser beam. (Laser
radiation is invisible.)
With the unit turned "on", laser radiation is emitted from the
pickup lens.
- Avoid exposure to the lase beam, especially when performing
adjustments.
This unit SL-DV250 is designed to operate on power supplied from the system connected. (For
system connection, refer to Fig. 3.)
Fig. 3
44