Assembly And Use - Feider Machines FPB900W Original Instructions Manual

5. ASSEMBLY AND USE

Selecting the right grade of sanding belt
Different grades of sanding belt can be purchased from the store where
you purchased the tool. Available grades are: Coarse, Medium and Fine.
Use a coarse grit to sand down rough finishes, medium grit to smooth the work
and fine grit to finish off.
It is best to make a trial run on a scrap piece of material to determine the
optimum grades of sanding belt for a particular job.
GRIT CHART
Grit Type
60 or less Very Coarse
80 – 100 Coarse
120 – 150 Medium
180 – 220 Fine
240 or more Very Fine
Example of use
Material removal, heavy paint removal,
shaping wood
Paint removal, rough surface preparation (e.g.
non-planed wood)
Surface preparation planed wood
Sanding between coats
Final finishing
10