Table of Contents
Advertisement
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control
of the tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool is
maintained.
Belt sander safety warnings
Hold the power tool by insulated gripping surfaces, because the sanding surface
may contact its own cord. Cutting a "live" wire may make exposed metal parts of
the power tool "live" and could give the operator an electric shock.
WARNING Contact with or inhalation of harmful / toxic dusts arising from sanding
painted surfaces, woods and metals can endanger the health of operator and
bystanders.
Take special care to guard against these dusts, including the following:
-All persons entering the work area must wear an approved mask specially
designed for protection against harmful / toxic dusts, in addition to using the
dust extraction facility, and keeping work area well ventilated.
- Children and pregnant women must not enter the work area.
- Do not eat, drink or smoke in the work area.
Any pre 1960 building may have paint containing lead on wood or metal
surfaces. If you suspect workpiece contains lead seek professional advice.
Some wood and wood type products especially MDF (Medium Density
Fibreboard) can produce dust that can be hazardous to your health. We
recommend the use of an approved face mask with replaceable filters when
using this machine in addition to using the dust extraction facility.
5
Advertisement
Table of Contents
