Subscribe to Our Youtube Channel
Related Manuals for Feider Machines FPEP8502P
Summary of Contents for Feider Machines FPEP8502P
- Page 1 ORIGINAL INSTRUCTIONS >EN PLASTER SANDER FPEP8502P INSTRUCTION MANUAL CAUTION: Read the instructions before using the machine!
-
Page 2: Table Of Contents
CONTENTS 1. SAFETY INSTRUCTIONS......................3 2. YOUR PRODUCT........................... 6 3. OPERATING INSTRUCTIONS......................7 4. INSTALLATION PROCEDURE......................8 5. OPERATION............................9 6. USE................................. 10 7. CARE AND MAINTENANCE......................11 8. DISPOSAL.............................11 9. DECLARATION OF CONFORMITY....................12 10. WARRANTY............................13 11. PRODUCT FAILURE ........................14 12. WARRANTY EXCLUSIONS......................15... -
Page 3: Safety Instructions
1. SAFETY INSTRUCTIONS 1.1 GENERAL SAFETY INSTRUCTIONS WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 4 h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. 4) Power tool use and care a) Do not force the power tool.
- Page 5 rotation, causing loss of control or kickback. e) Do not attach cutting chains, wood-carving blades or toothed saw blades. Such blades cause frequent bouncing and loss of control. 1.3 SAFETY WARNINGS SPECIFIC TO SANDING OPERATIONS Do not use oversized abrasive paper for sanding discs. Follow manufacturers' recommendations when selecting sanding paper.
-
Page 6: Your Product
Variable speed adjustor Round sanding pad Adapter Location of carbon brush Flexible hose ON/OFF switch Auxiliary handle Triangular sanding pad 2.2 TECHNICAL DATA Model FPEP8502P Power supply 230V~ 50Hz Power 850W No-load speed 1000-1850/min Diameter of round sanding plate 225mm Net weight 3.1kg... -
Page 7: Operating Instructions
INFORMATION : Total declared vibration values and noise emission values have been measured in accordance with a standard test method and can be used to compare one tool with another. Total declared vibration values and declared noise emission values can also be used in a preliminary exposure assessment. -
Page 8: Installation Procedure
ATTENTION: Please wear a mask and goggles against fog and dust. Push the wall sander switch to ON. Position the wall sander lightly against the work surface (apply light pressure to align the sander head with the work surface). Apply additional pressure to push the abrasive pad to the work area, while moving the sander so that it overlaps to smooth drywall towards the edges. -
Page 9: Operation
CAUTION: Failure to use a dust collection bag will increase the presence of dust particles in the work area. Continuous and prolonged exposure to high concentrations of dust may affect the respiratory system. 5. OPERATION 5.1 SWITCHING THE WALL SANDER ON AND OFF Ensure that the power supply voltage is identical to that shown on the sander nameplate. -
Page 10: Use
6. USE This tool is designed for sanding walls and ceilings made of sheet metal or plasterboard. By completing the job faster than conventional sanding methods and offering a superior finish, it is an ideal tool for new construction and renovation work. Before use After unpacking your tool, check that it is complete and undamaged. -
Page 11: Care And Maintenance
b. Speed adjustment This sander features a variable speed drive which allows the user to select the desired rotation speed. Speed is set by turning the speed control knob, which has 7 positions (min to max). The min level is the lowest speed (approx. 1000 rpm), while the max level is the highest (approx. 1850 rpm). -
Page 12: Declaration Of Conformity
ZI, 32 RUE ARISTIDE BERGES - 312070 CUGNAUX - France Declares that the machine described below : Product : Plaster sander Model: FPEP8502P Serial number: 20240119617-20240119866 Developed, designed and manufactured in compliance with the requirements of : Machinery Directive 2006/42/EC... -
Page 13: Warranty
10. WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 5 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 14: Product Failure
11. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: • Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. •... -
Page 15: Warranty Exclusions
12. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 16 BUILDER SAS 32 rue Aristide Bergès - Z.I. du Casque - 31270 Cugnaux - France Made in PRC...
Need help?
Do you have a question about the FPEP8502P and is the answer not in the manual?
Questions and answers