Operation Controls And Procedures - Ziton ZP2-AF1-S Operation Manual

Operation controls and procedures

Using the function buttons and the jog dial
Use function buttons F1 to F4 and the jog dial (see Figure 3 on page 11) to
navigate the LCD menus, to select menu options, and to enter passwords and
system information, as shown below.
Entering passwords and
system information
Selecting soft keys from the
LCD menu
Navigating and confirming
menu selections
The control panel ID on the LCD is white text with a dark background when the
jog dial is active (the control panel is waiting for input).
Configuration options
The options listed below are available when making configuration changes to the
control panel (for example, changing the password).
The control panel configuration (and configuration revision) is only updated when
configuration changes are applied by pressing F3 (Apply).
The configuration revision change and timestamp are recorded in the Revision
report and can be accessed at operator level (see "Viewing reports" on page 28).
Table 10: Configuration control options and keys
Option Key
Save F1
Apply F3
Discard F4
Exit F2
Note: When updating multiple configuration settings, we recommend that you
save after each change and then apply all changes from the Main menu.
ZP2-A Series Operation Manual
Turn the jog dial clockwise or anticlockwise to enter passwords
and other system information. Press the jog dial to confirm an
entry.
Press the function buttons F1 to F4 to select the corresponding
menu options (Main menu, Logout, Exit, etc.).
Turn the jog dial clockwise or anticlockwise to select an option
from the on-screen menu. Press the jog dial to confirm the
selection.
Description
Saves the current configuration change without applying it immediately.
Applies the current configuration change and all stored (saved)
configuration changes. The control panel will reset automatically.
Discards all stored (saved) configuration changes that have not been
applied.
Exits the configuration process without storing or applying the current
configuration change.
21