Table of Contents
Advertisement
Operator level operation
The operator level is protected by password security and is reserved for
authorized users who have been trained to operate the control panel. The default
operator user password is 2222.
This user level lets you:
•
Perform all tasks described in "Public level operation" on page 22
•
Reset the control panel
•
Manually start sounders, stop sounders, or restart stopped sounders
•
Manually start or stop evacuation sounders
•
Enable or disable previously configured sounder, fire routing, and fire
protection delays
•
View system status reports
•
Change the operator password
•
Perform LED, LCD, buzzer, and keyboard tests
•
View the alarm counter
The Main menu
The operator Main menu is shown below.
Figure 5: The operator Main menu
Resetting the control panel
Caution:
If the LCD indicates a loop short circuit error, contact your installation
or maintenance contractor to restore the loop (by resetting the control panel at
Installer level).
To reset the control panel and clear all current system events, press the Reset
button. System events that have not been resolved will continue to be reported
after reset.
Caution:
Investigate all fire alarms and faults before resetting the control panel.
ZP2-A Series Operation Manual
25
Advertisement
Table of Contents
