Ziton ZP2-AF1-S Operation Manual page 18

Icons displayed on the LCD
Icons displayed on the LCD are shown below.
Table 7: LCD icons and descriptions
Icon
Day mode (network)
Day mode (control panel)
Night mode (network)
Night mode (control panel)
Fire alarms [2]
Faults [2]
Conditions [2]
Stand-alone
Networked
Repeater
Detector alarm [1]
Manual call point alarm [1]
12
Description
This icon indicates that the primary sensitivity mode
setting for control panels in the fire network is day
mode.
This icon indicates that the sensitivity mode for the
local control panel is day mode. Other control panels in
the fire network may have a different sensitivity mode
setting.
This icon indicates that the primary sensitivity mode
setting for control panels in the fire network is night
mode.
This icon indicates that the sensitivity mode for the
local control panel is night mode. Other control panels
in the fire network may have a different sensitivity
mode setting.
The number beside this icon indicates the number of
zones with an active fire alarm. Alarm information for
the first and last zones to report an alarm is displayed
in the LCD message area.
The number beside this icon indicates the number of
active faults. Additional information is available by
pressing F1 (Show Events).
The number beside this icon indicates the number of
active system conditions (events). Additional
information is available by pressing F1 (Show Events).
This icon indicates that the control panel is not
connected to the fire network.
This icon indicates that the control panel is connected
to the fire network.
This icon indicates that the control panel is configured
to operate as a repeater and is connected to the fire
network.
This icon indicates a detector alarm.
This icon indicates a manual call point alarm.
ZP2-A Series Operation Manual