Agilent Technologies E7474A Getting Started Manual page 73

NOTE
NOTE
Setting Up Your System
Phone-Based System Setup
f. Use the default port settings or use the values according to the
PCMCIA Socket I/O card you are using.
g. Click when you are satisfied with the settings.
OK
h. Select Collection mode to start the measurements.
Never set your GPS receiver protocol as TAIP and TSIP together. The
Agilent Wireless Solutions Software is designed to work with one protocol at
a time. Having both protocols active may confuse the system.
If you need to change the GPS coordinate datum, select the Advanced tab of
GPS hardware configuration box. The default datum can be set using the
and selecting the Default Datum tab.
Tools > Options
82 Agilent Wireless Solutions