CAUTIONS
Setting Up Your System
Connecting the Hardware
•
The input power to the Agilent digital receiver should not exceed
-10 dBm. Receiver measurements are not warranted for power levels
between -10 dBm and 10 dBm. Power levels greater than 10 dBm damage
the instrument.
•
For optimum performance, it is recommended that no more than -40 dBm
be applied to the input of all other types of receivers.
•
Never test the vehicle's battery when your GPS is connected to it. First,
disconnect the GPS receiver, and then test your battery. Never "jumpstart"
your vehicle's battery with the GPS connected. It may cause severe
damage to the GPS receiver.
26
Agilent Wireless Solutions