Gps Antenna Alignment (Base And Rover); Figure 45: Installation: Mounting Angle And Compass Measurement - Redline RAS-Extend M Installation Manuallines

RDL-3000 RAS-Extend M Installation Guidelines
7.2.2

GPS Antenna Alignment (Base and Rover)

For accurate tracking the GPS antenna system must be correctly aligned with the
movement of the vessel/platform.
Important: The Base and Rover GPS antennas establish the orientation of the antenna
positioner system. Locate the Base GPS (RF-1) antenna at the rear of the positioner and
the Rover GPS (RF-2) antenna at the front of the positioner and as shown in the
following diagram.

Figure 45: Installation: Mounting Angle and Compass Measurement

70-00174-04-00 Proprietary Redline Communications © 2014 Page 47 of 58 July 16, 2014