Table of Contents
Advertisement
RDL-3000 RAS-Extend M Installation Guidelines
2.9
Power, Control & RF Cable
The Power, Control & RF Cable is the main connection between the RAS-Extend M
wireless terminal and the RAS-Extend M antenna positioner. The 10-pin to 43-pin cable
transfers power and control signals from the wireless terminal to the antenna positioner
unit. The RF cables conduct the RF signals between the wireless terminal and the
positioner, where RF jumper cables connect these signals to the moving antenna system
(RF-x-Out).
The 10-position and 43-position connectors are weatherproof when installed. All RF
connectors must be weatherproofed.
2.10
Power & Data Cable
The RAS-Extend M Power & Data cable conducts data between the RAS-Extend M
power adapter and the wireless terminal.
The 11-position circular connectors are weatherproof when installed.
70-00174-04-00
Figure 18: Features: Power, Positioner Control + RF Cable
Figure 19: Features: Power & Data Cable
Proprietary Redline Communications © 2014
Page
27
of 58
July 16, 2014
Advertisement
Table of Contents
