Table of Contents
Advertisement
RDL-3000 RAS-Extend M Installation Guidelines
2.3
Power Supply
The RAS-Extend M Power Supply unit provides the Ethernet connection to the local
network and the primary power input for the RAS-Extend M system.
Power In Port
The Power In port (3-pin circular / M) for 120/240 50/60 Hz VAC power.
IMPORTANT: A mating power plug (3-pin circular / F) is supplied with the system. The
installer must terminate this plug to the power supply cable supplied by the installer.
Data & Power Out
The power & Data out port (11-pin circular / F) delivers DC power and Ethernet
connectivity to the RAS-Extend M wireless terminal. A pre-terminated cable is provided
to connect the Power Supply unit to the RAS-Extend M wireless terminal.
Ethernet Port
The Ethernet port (RJ-45 / F socket) provides Ethernet connectivity with the local
network.
70-00174-04-00
Figure 9: Features: Power Supply Ports
Table 4: Features: AC: Power Plug
Position
A
B
C
Table 5: Features - Ethernet Port RJ-45 Pinout
RJ-45 Pin
Function
1
Data pair 1
2
Data pair 1
3
Data pair 2
4
NC
5
NC
6
Data pair 2
7
NC
8
NC
Proprietary Redline Communications © 2014
Signal
Line (Black)
Neutral (White)
Ground (Green)
Page
22
of 58
July 16, 2014
Advertisement
Table of Contents
