RDL-3000 RAS-Extend M Installation Guidelines
6.3
Wireless Terminal Mounting Plate
The wireless terminal must be prepared by installing the mounting plate.
If the GPS antenna arm is to be mounted directly below the RAS-Extend M positioner,
the wireless terminal is mounted directly on the mounting bracket supplied with the GPS
Antenna Kit.
Figure 41: Assembly: Wireless Terminal Mounting Bracket
If the GPS antenna arm is mounted more than 1.5 m (4 ft) from the RAS-Extend M
positioner, use the supplied stand-alone mounting bracket kit.
Figure 42: Assembly: Wireless Terminal Stand-Alone Mounting Bracket Kit
70-00174-04-00
Proprietary Redline Communications © 2014
Page
44
of 58
July 16, 2014