Table of Contents
Advertisement
RDL-3000 RAS-Extend M Installation Guidelines
2.11
GPS Antenna Kit
The RAS-Extend M uses a set of two (2) active-type GPS antennas. The two RF ports
(TNC / F) conduct RF signals between the GPS antenna system and the wireless
terminal (N-Type / F). using a TNC / M to N-type / M cable.
The GPS system provides compass coordinates when the RAS-Extend M system is in
motion. These coordinates are used to determine the location, speed and direction of
travel.
Figure 20: Features: GPS Arm Components
Rover GPS Antenna
The Rover GPS antenna must be located towards the front of the vessel/platform.
Base GPS Antenna
The Base GPS antenna must be locate towards the rear of the vessel/platform.
Figure 21: Features: GPS Arm Dimensions
70-00174-04-00
Proprietary Redline Communications © 2014
Page
28
of 58
July 16, 2014
Advertisement
Table of Contents
