RDL-3000 RAS-Extend M Installation Guidelines
7.2
Mount GPS Antenna System and Wireless Terminal
7.2.1
Basic GPS Antenna Alignment (Base and Rover)
GPS Mounted Separately
Installing the 6 m GPS Antenna Cables
Check the following items before routing the antenna cable:
Avoid excessive force or stress on the connectors as the cable may be damaged. Do
not use connectors as cable grips to pull cable through conduit.
Avoid any sharp bends in the coaxial cable. Check the recommended minimum bend
radius of the cable.
All exterior cable must be secured, or routed within a conduit, to prevent cable
vibration in windy conditions.
All hanging cables in vertical conduits and riser closets should be supported by
hangers to relieve strain from the weight of the cable.
70-00174-04-00
Figure 44: Installation: Mount GPS Antenna System
Proprietary Redline Communications © 2014
Page
46
of 58
July 16, 2014