Table of Contents
Advertisement
RDL-3000 RAS-Extend M Installation Guidelines
4.5
Survey Power Source
The installer must:
1. Provide a compatible power source for the RAS-Extend M system.
2. Provide a power cord from the AC source to the Power Supply. A mating
weatherproof plug is provided for connection to the adapter. Use the following system
power requirements to determine:
a) required power source capacity
b) type of cable
c) conductor gage
Heater Off: Temp. > -15 °C (5 °F)
Heater On: Temp. ≤ -15 °C (5 °F)
3. Terminate the power cord from the AC source to the Power Supply using the provided
mating weatherproof plug for connection.
70-00174-04-00
Table 7: Survey: Power Cable
Figure 26: Survey: Power Cable Length
Proprietary Redline Communications © 2014
380 W
570 W
Page
34
of 58
July 16, 2014
Advertisement
Table of Contents
