Table of Contents
Advertisement
2
Getting Started
Powering up the
Archive Writer
A-61038
July 1999
This chapter provides you with instructions on how to do the
following:
• Turn on the power for the Archive Writer. (Be sure the host PC
is up and running.)
• Load the media into the cassette(s).
• Load the cassettes into the Archive Writer.
To power up the Archive Writer:
NOTE: Upon power-up, the Archive Writer downloads the
software from the host PC. Therefore, the host PC must
be up and running.
• Place the power switch (located in the back of the Archive
Writer) in the On position (|). When the Archive Writer is
powered on, the Kodak Digital Science logo is displayed with
the Archive Writer model information.
Document Archive Writer
Model 4800 Vx.x.x
Copyright ® mm/dd/yy
Press Any Key to Start
• The display backlight will turn on, and after a brief pause for
system initialization, the Main Menu will be displayed. Press any
key to display the Main Menu.
F
On Line
On/Off
Line
NOTE: After 15 minutes of keyboard inactivity the backlight is
turned off. To turn the backlight on, press any key on the
operator interface.
E
F
E
Clear
Film
Messages
Supply
2-1
Advertisement
Table of Contents
