Table of Contents
Advertisement
Loading cassette(s) into
the Archive Writer
A-61038
July 1999
An Archive Writer cassette can be loaded into either the upper or
lower slot, or both.
Drive Release
1. Open the cassette access door.
2. Swing the drive release lever (green handle) out.
3. Insert cassette(s).
NOTE: Refer to the label on the inside of the cassette access
door for cassette orientation. The display on the
cassette is oriented differently depending upon the
media slot being used.
4. Swing the drive release lever back into place.
5. Close the cassette access door.
Whenever a new or partial roll of media is loaded into the Archive
Writer, a leader is automatically made when the cassette access
door is closed and the Archive Writer has been powered up.
A media advance symbol (
display while the leader is being advanced. Once a normal
operating display appears, indicating that the leader has been
advanced, check the media supply indicators on the control panel
to determine if you have enough media to complete the job.
Lever
) will appear in the status
2-9
Advertisement
Table of Contents
