Table of Contents
Advertisement
Operating without a cassette
battery
Loading media into the
cassette(s)
2-4
A standard 9-volt battery powers the cassette. The cassette can
be used for normal operation without a battery; however, certain
displays/functions will not be available:
• The media supply gauge will not appear.
• The cassette ID number will not appear.
• The media indicator will not appear.
• Job information will not be retained (image address, level, etc).
NOTE: If an error message appears in the Archive Writer
status display when loading a cassette without a
battery, clear the message to continue. The Archive
Writer will advance the media to verify that the media
and cassette are correctly loaded.
IMPORTANT: Always load and unload the media in subdued,
indirect light to help prevent "fogging."
The following steps are required to load the media into the
cassette(s):
1. Select the correct media ( Kodak Archive Storage Media) and
appropriate cassette(s).
2. Check the cassette display before loading a new roll of media:
• Verify that the media supply indicator shows that the
cassette is empty.
• Verify that there is not a low battery symbol. If a low battery
symbol appears, or the display is not visible, replace the
battery (refer to the section entitled, "Replacing the media
cassette battery").
A-61038
July 1999
Advertisement
Table of Contents
