Table of Contents
Advertisement
Running the film to the end
3-8
To run the film to the end:
F
Film Control
Film
Supply
1. Press Run to End. The film will run to the end of the spool and
the status will be displayed on the film icons.
F
Run To End
Film
Supply
2. When this screen is displayed, you may press Stop Advance
at any time while the film is advancing. When the cassette runs
out of film or the Stop Advance button is pressed, the Film
Control screen will be redisplayed.
NOTE: If you press Film Supply, the amount of the film
remaining in the upper and/or lower cassette will be
displayed on the screen as current units
(English=feet/metric=metres). The film indicators also
display the amount of film remaining in the cassettes
as percentages. For example, 3 bars (|||) would
indicate 30% of film remaining.
If the Error symbol is displayed, you can view the
message(s) by pressing the Clear Message button.
The last ten messages can be viewed on the screen
by pressing the Clear Message button. If there are
more than ten messages, you can view the rest of
them via the Error Log screen.
You can return to the Main Menu by pressing the Main Menu
button.
E
F
E
Film
Run To
Advance
End
E
F
E
Clear
Message
Main
Menu
Stop
Advance
A-61038
July 1999
Advertisement
Table of Contents
