Table of Contents
Advertisement
4-6
248
Check host
Could not support a command given a semaphore file's
contents.
Check next command file's contents.
250
Check host
Cannot open the host application interface manager's
command file that was written.
Make sure the command file created is readable by the
target system.
251
Check host
Command ID for a command that is not one of the
supported command IDs.
Consult the manual.
252
Check host
Parameters not valid for a command (e.g., wrong
parameter IDs).
Consult the manual for proper parameter format.
253
Check host
No command ID contained in the command file.
Consult the manual for proper command file format.
255
Check host
Invalid image address format.
An invalid image address format was received from host.
Restart the job.
If problem persists, call your systems integrator.
A-61038
July 1999
Advertisement
Table of Contents
