Table of Contents
Advertisement
POW ER
Power and control are combined within the IP66-rated feed and link cables using a
proprietary design. Neighboring units can be directly connected without need for extra
cables.
The color designations for the optional feed cable are as follows:
Control cores: 24 AWG / 0.25mm
Power cores: 14 AWG / 2.5mm
Always follow these steps when using Terra Linear cabling:
• Ensure that the power input is isolated from the mains supply.
• At each connection, remove the cover caps from both the socket and plug.
• Align the orientation marks of the socket and plug, then push them together and twist
the locking collar to lock them fully together.
• Do not exceed the stated maximum fixtures in a daisy chain - see page 16.
• At the final fixture in a daisy-chain run, install a terminator (end cap) to
seal off the power bus and also correctly terminate the DMX control feed
(see page 12).
• To release a connection, ensure that the power input is isolated, then twist the locking
collar to release the connection.
IMPORTANT: Ensure that power earth and
2
DMX GND are both tied to true earth.
2
www.acclaimlighting.com
11
Advertisement
Table of Contents
