Int Rodu C T Ion; Welcome; Safety, Maintenance And Cleaning - Acclaim Lighting Terra Linear User Manual

INT RODU C T ION

W E LCO M E
Welcome to the Terra Linear™ range from Acclaim Lighting. These tough, drive-over ready
fixtures designed for all-weather in-ground applications. Available in 1 foot and 4 foot
lengths, these aluminum-bodied IP68 fixtures are particularly suited to recessed façade
lighting applications. A wide range of emitter, beam angle and power options make it
straightforward to match each unit to the specific requirements of your installation.
Using unified power and DMX control links, Terra Linear fixtures can be rapidly daisy-chained
in long runs. All standard mains voltages are directly supported or, to achieve impressive
single runs up to 700 linear feet (213m), Terra Linear can be driven by Acclaim Lighting's XTR
Driver.
Control is achieved using the industry standard DMX-512A format, with RDM for
configuration. DALI and 0-10V control inputs can also be used when an XTR Driver or
optional converters are employed.
SAF E T Y
• When fixtures are mounted off-ground, ensure they are securely fitted to an appropriate
mounting surface.
• Ensure that the power input is supplied from an environmentally protected location, is
correctly fused and has a valid protective earth that is tied to true earth.
HIGH VOLTAGE
MAI N T E N A N CE
CAUTION: Always isolate mains power before starting maintenance operations.
• Ensure that all mounting (and device) screws/bolts are fully tight and free of corrosion.
• Ensure there is no deformation to the housing, lenses or fixing points.
• Check that all power supply cables are free from physical damage or material fatigue.
• Use only genuine spare parts supplied by Acclaim Lighting.
C L E A N I N G
• Use a moist, lint-free cloth along with warm water when cleaning each fixture.
• Never use alcohol or solvents.
2
SA FE TY, M A IN T EN A NC E AND CLE AN ING
WARNING - HIGH VOLTAGE
This device can use high voltages (up to 400VDC) which could
cause severe personal injury or death if misused:
• Always isolate power before connecting or disconnecting links.
• Installation to be carried out by certified electricians only.
• Use only approved cables and connectors.
• Check all connections are correctly made before energizing.
www.acclaimlighting.com