Table of Contents
Advertisement
INSTALLATION
When installing each Pixel Bar fixture, ensure that the surface is level and that nothing is
protruding to damage the mounting bracket(s). Suitable mounting surfaces include steel,
aluminum, concrete or wood structures.
4' models have eight mounting slots while 1' models have four in total. Each slot measures
0.31" x 0.16" (8 x 4mm) and the base has a thickness of 0.14" (3.5mm).
Select bolts or screws (not supplied) that fit the mount
bracket base(s) correctly and are particularly
suited to the mounting surface.
POWER AND CONTROL CABLING
Pixel Bar fixtures use proprietary connectors (mains plus DMX) for
their inputs and outputs. The connector placements at each end
of every fixture are such that abutted
fixtures can be directly connected
without need for extra link
cables.
The contacts of
the required
feed-in cable
(available as a
separate item)
are arranged as
shown here:
Note: Ensure that the mains power is supplied from a suitably protected source and initial
connections are made within IP rated enclosures.
4
4' models: 4 slots per side (8 in total) spaced 12.8" (325mm apart)
1' models: 2 slots per side (4 in total) spaced 6.1" (155mm apart)
]
r t h
[ E a
l o w
Y e l
e n /
w n
G r e
B r o
s s B
G l o
g e
L a r
M a
a l l
S m
e ]
[ L i v
r a l ]
e u t
k [ N
l a c
u n d
G r o
M X
k [ D
l a c
i t e
t t B
W h
www.acclaimlighting.com
]
]
X –
[ D M
]
X +
[ D M
R e d
Advertisement
Table of Contents
