Table of Contents
Advertisement
8 Once the finished surface has
been applied, carefully remove
the pour cover to reveal the
chamber.
9 Set the Terra Linear fixture near
the sleeve and connect the
cables.
Note: When attaching cables
and/or termination end cap,
ensure the connectors are
correctly mated and fully
locked to prevent water
penetration. Failure to do so
may invalidate the warranty.
See page 12.
10 Carefully fold the cables into
the chamber as the Terra Linear
is lowered. The 1ft sleeve in
particular is a tight fit.
11 Insert the supplied bolts and
tighten using a Torx T20 security
driver (not supplied).
10
www.acclaimlighting.com
Advertisement
Table of Contents
