Konica Minolta CHROMA METER Instruction Manual page 91

4.
The list of stored values is displayed.
Press the UP key or DOWN key to
select the item you want to delete.
You can see the details of the selected item by
pressing the RIGHT key.
You can check the measurement condition,
target, user calibration value, etc. by pressing
the INFO key.
When no data has been stored, "Measurement
data not found." is displayed. When no target or
user calibration data is stored it is displayed as
"- - -".
5.
When you press the ENTER key, a
confirmation message is displayed.
Press the RIGHT key or LEFT key to
select [Yes] or [No] and press the
ENTER key to confirm the action.
6.
Press the ESC key twice.
The measurement screen is displayed on the
LCD screen.
89