You can check the details of the current data by
pressing the RIGHT key or LEFT key.
5.
Press the ENTER key.
The screen for entering a target is displayed.
6.
Press the UP / DOWN key and the
RIGHT / LEFT key to set values and
then press the ENTER key.
7.
Press the ENTER key on the
confirmation screen to return to the
menu screen.
(If the entered value is out of the available
setting range, the screen returns to the value
entry screen. Enter another value.)
8.
Press the ESC key.
The measurement screen is displayed on the
LCD screen.
The specified values are stored even when the
power switch is set to OFF ().
77