Advantech AIIS-1882 User Manual page 33

4-channel pwm lighting controller module for aiis vision system

Table of Contents

Digital Output

Switch the tab to Digital Output, then connect the power and output device (e.g. LED)

to digital output pin. Press the button, then the output will react accordingly.

Figure 3.19 Device Test for digital output

PWM Lighting Output

Switch the tab to Counter, then connect the lighting directly to LT1~4. Set the PWM

high/low period. Check the Start box will start the lighting output.

Figure 3.20 Device Test for lighting output

AIIS-1882 User Manual

Table of Contents