Advantech AIIS-1882 User Manual page 22

Pin Name
Power V+
Power V-
2-pin Lighting Connectors (LT0~LT3)
The connector that AIIS-1882 provides by default is a 2-pin connector. If the lighting
to be connected with it is 3-pin, then the 3-pin accessories (front panel and cable)
need to be purchased separately. The pin definition for a 2-pin connector is shown
below:
Figure 2.13 Pin assignment of 2-pin lighting connector
Pin Name
Lighting V+ (PWR_OUT)
Lighting V- (CNT_OUT)
3-pin Lighting Connectors (LT0~LT3)
This is the optional lighting connection for AIIS-1882. Pin define as below:
Figure 2.14 Pin assignment of 3-pin lighting connector
Pin Name
Lighting V+ (PWR_OUT)
Lighting V- (CNT_OUT)
AIIS-1882 User Manual
Figure 2.12 Pin assignment of external power
Description
Positive pin for external power input
Negative pin for external power input
Description
Positive pin for lighting
Negative pin for lighting (PWM control pin)
Description
Positive pin for lighting
Negative pin for lighting (PWM control pin)
12
Pin Number
2, 3
1, 4
Pin Number
2
1
Pin Number
2, 3
1