Table of Contents
Advertisement
Figure 3.9 Lighting output intensity with different PWM duty cycles
The lighting output could be set to 3 modes:
1.
Infinite lighting output
2.
Finite lighting output period
3.
Strobe (single PWM output)
The corresponded parameters to configure are high period, low period, and output
count. The high period and low period define the PWM high and low time span in a
period of PWM output respectively. The output count specifies the number of PWM
period that the output generates in each output cycle. The configuration interface in
Navigator is as shown below:
Figure 3.10 PWM properties in Navigator
17
AIIS-1882 User Manual
Advertisement
Table of Contents
