Table of Contents
Advertisement
5.
Plug the lighting cables on the board for CN10~13 (figure 2.3).
6.
Plug the other end of the lighting cables into the front panel, CN10 to LT0, CN11
to LT1, CN12 to LT2, CN13 to LT3. (figure 2.3).
7.
Screw the I/O panel back onto the front panel.
8.
Screw the top enclosure back onto the AIIS-3411
Figure 2.2 Assemble the AIIS-1882 into AIIS-3411
7
AIIS-1882 User Manual
Advertisement
Table of Contents
