3.6
Device Test in Navigator Utility
To test the functions of AIIS-1882, the Navigator utility should be installed in advance.
The AIIS-1882 provides digital input, digital output and PWM lighting output. All of
these function tests can be found in Device Test in Navigator. The parameter set in
the Profile page will be applied to Device Test, as long as the profile is saved.
Digital Input
Switch the tab to Digital Input, then connect the signal to digital input pin. The indica-
tors on the panel will turn red or green according to the input status.
AIIS-1882 User Manual
Figure 3.17 Profile setting of AIIS-1882
Figure 3.18 Device Test for digital input
22