Wall Mounting - Free2Move eSolutions eProWallbox Installation Manual

2.6.

Wall mounting

T e national and international buildin re ulations set out in IEC 60364-1 and
IEC 60364-5-52 must be respected w en xin eProWallbox to t e wall. Correct
positionin of t e c ar in station is important to ensure it functions properly.
To x the main body to the wall,
The plugs supplied are universal, and are suitable or solid or hollow bri k walls. For installation
on walls made o di erent materials (e.g. plasterboard), spe i
only be installed on e the maximum permissible load has been veri ed.
1.
Before installation, it is necessary to determine the position and distances from walls.
e recommend maintaining a distance o about
installation and maintenance.
2.
To facilitate installation and wall mounting, use the template supplied to drill the
ing holes
3.
sing a drill make
de th o the hole must be
4.
Push the
5.
Secure the main body to the wall by inserting the screws through the holes.
lugs
he tem late should also be used or levelling
mm holes
mm
ing lugs into the holes
mm are re uired.
cm rom the
here the ing oints are marked
hen remove any drilling residue rom the holes
ith a hammer
plugs are re uired, and must
alls to acilitate
ith a s irit level
he minimum
276