Free2Move eSolutions eProWallbox Installation Manual page 30

Error Code Error Description
315 Current over limit on phase L1
316 Current over limit on phase L2
317 Current over limit on phase L3
318 Voltage below a threshold on phase L1
319 Voltage below a threshold on phase L2
320 Voltage below a threshold on phase L3
400 State A dete ted on the Control Pilot line in pilot simpli ed ase
4. MAINTENANCE
Be ore arrying out any maintenan e work, power o the devi e and dis onne t it rom the
ele tri vehi le.
Only uali ed personnel an open the eProWallbox and per orm operations on the omponents.
eProWallbox does not contain components t at t e user can repair or maintain
autonomously.
A dama ed or defective appliance must not be used in any way, but must instead
immediately be replaced or repaired by uali ed personnel in accordance wit t e
manufacturer s instructions.
Cleaning the outside o the devi e is always re ommended when ne essary, and should be
arried out using a so t damp loth with a mild detergent. When nished, wipe o any tra es o
moisture or li uid with a so t dry loth.
Avoid strong ets o air or water as well as the use o soaps or detergents that are too harsh
and orrosive or the materials o the produ t.
The owner is responsible or maintenan e and onditions o the produ t. Maintenan e must
always be arried out in a ordan e with urrent regulations while ensuring that people,
property and animals are prote ted during all maintenan e operations.
Troubleshooting
Remove the plug. I the error persists restart the wallbox
Remove the plug. I the error persists restart the wallbox
Remove the plug. I the error persists restart the wallbox
Remove the plug. I the error persists restart the wallbox
Remove the plug. I the error persists restart the wallbox
Remove the plug. I the error persists restart the wallbox
Remove the plug. I the error persists restart the wallbox
289