Commissioning; Starting Sopasair; Password Management; Password Assignment - SICK Lector85x Operator's Manual

7

Commissioning

7.1

Starting SOPASair

7.2

Password management

7.2.1

Password assignment

8027859/1INN/2023-03-08 | SICK
Subject to change without notice
Overview
SOPASair is used for operation, parameterization, and servicing purposes (e.g., diagnos‐
tics, data logger).
Prerequisites
• Computer with Ethernet connection
• Device is connected to the computer via Ethernet.
• Voltage supply is connected.
• Computer and device are located on the same network.
• Computer and device have different IP addresses.
• Access data
Rights
Read
Read and write
Approach
1. Open web browser (recommendation: Google Chrome).
2. Enter the device IP address into the address line.
Default IP addresses:
P1 and P2: 192.168.1.1
°
P3: 192.168.0.1
°
✓
The user interface is displayed.
3. To make changes, log in to the device.
Overview
Reading the parameter settings is possible without a password. A password can be
assigned to protect the product against unauthorized changes to the settings.
Prerequisites
• When assigning a password for the first time, ensure the connection is secure, e.g.
by using a point-to-point connection to the device.
Approach
1. Establish a connection to the product in the web browser.
2.
Select:
3. Log in with the default password servicelevel.
✓
You will be prompted to assign a new password.
4. Assign a new password.
✓
The new password is valid immediately.
5. Log in again with the newly assigned password.
COMMISSIONING
Password
Can be accessed without a password
Default password: servicelevel
O P E R A T I N G I N S T R U C T I O N S | Lector85x
7
31