New features/Changes
⚫
Crop mark sensor correction
Automatic correction is performed in the user mode, if the crop mark cannot be detected.
Correction values can be changed by the operation panel after automatic correction is performed.
CROPSENS CALIB
SENS CALIB
Separate test for printing and cutting with crop marks
You can print crop marks only, and perform cutting test and correction of misalignment
in actual laminated media.
Adjustment procedure:
1. Perform [PRINT ONLY] in [CROP-CUT ADJ.].
2. Crop marks are printed.
3. Laminate the media.
4. Perform [CUT ONLY] in [CROP-CUT ADJ.].
5. Crop marks are read and cutting is performed.
6. Enter correction value.
SENS LEVE
33%
43%
Crop mark
Correction is performed according to
the misalignment resulted in step 5.
6.Other Features
CONFIDENTIAL
Cutting line
30/42