Roland LEC2-300 Product Manual page 42

Installation
⚫
TU4

New mode which takes up the media while slacking has been added. (For media which is firm and
has slippery back surface such as vinyl)
By slacking the media once, the dancer roller's distortion is reset, and take-up can be stabilized.
Dancer roller
The machine performs
printing and the media is fed.
1
*The actual placement of the
sensor is not as shown here.
With [STANDARD], the media is slacked and taken up.
Slack and take up the media
paper
core
*Sensor
The media is not taken up
even after the dancer roller
hit the lower sensor
2
immediately.
After the dancer roller hits
the sensor, the media is
taken up after a certain
3
period of time depending on
the FEED speed.
Parallelism adjustment is not needed.
10.Installation
CONFIDENTIAL
When the dancer roller
moves up and hits the upper
sensor, taking up of the
4
media stops.
41/42